Skip to content
Automatic Door Servicing
Menu

Automatic door not opening or closing: the common causes

Faults · 20 Nov 2026 · 2 min read · Automatic Door Servicing

Glass entrance doors of a building

Summary

Start with the switch, the power and anything in the track or sensor zone. If the door still misbehaves, or will not stop for people, switch it to manual or off and call an engineer.

A stuck automatic door is a security problem if it is open and an access problem if it is shut. Here are the usual reasons, in the order worth checking.

Will not open

  1. Programme switch. Set to “closed”, “night” or “exit only” by mistake.
  2. Power. A tripped isolator, a power cut, or a flat back-up battery after one.
  3. Sensor. Dirty, knocked out of aim, or blocked by a new sign or display. See our note on sensor problems.
  4. Lock. A night lock or bolt left engaged.

Will not close

  1. Something in the sensor zone. A mat, plant, banner or even sunlight can keep the door open.
  2. Debris in the floor track on a sliding door, stopping the leaf short.
  3. Programme switch set to “open”.
  4. A safety sensor fault. The door may stay open because it thinks someone is in the way.

Stops halfway, judders or slams

This is usually mechanical: worn rollers or belts, a misaligned leaf, a failing motor or gearbox, or an arm that has worked loose on a swing door. A door that slams, or does not stop and reverse when something is in its way, has lost the safety function the law expects (Workplace Regulations, regulation 18). Take it out of automatic use.

Making it safe while you wait

  • Switch the door to open or to manual, whichever keeps people safe and the building secure.
  • Keep the opening clear and put up a sign.
  • If it is on a fire escape route, make sure people can still get out. Escape routes fall under fire safety law (Fire Safety Order 2005).
  • Note the fault in the logbook.

Getting it fixed

Give the engineer the make, the fault and what you have tried. Our repair page explains call-out costs, and maintenance contracts can include call-outs if faults keep happening. To find a firm, use our automatic door servicing form.

Sources

Find a door engineer for your site

A postcode for the building is enough to start. Door details can follow.

No charge to you. We line up one door engineer that covers your area and tell you who it is first; your details only go to it after you agree.

Your site and contact details

Get a quote