Automatic Door Regulations and BS EN 16005
Who is responsible for a powered door, what the law and the standards require, how often it should be serviced and what to keep on file.

Whose duty is the door?
The duty holder is whoever controls the door: usually the employer or occupier, sometimes the landlord or a managing agent under the lease. They must have the door maintained by a competent engineer, keep a record of it, and make sure simple checks happen between visits. Where it is unclear, settle it in writing.
Three sets of regulations
Three sets of regulations do most of the work. The Workplace (Health, Safety and Welfare) Regulations 1992, regulation 18 says doors and gates must be suitably built with the safety devices they need, that powered doors must have features that stop them trapping people, and that where needed they must be openable by hand if the power fails. Regulation 5 asks for workplace equipment to stay in good repair and working efficiently, with a maintenance system where appropriate. Regulation 5 of PUWER 1998, the work equipment rules, adds that any maintenance log must be kept up to date.
A powered door is also machinery. Whoever installs one, or substantially changes it, must assess it, mark it and issue a declaration of conformity under the Supply of Machinery (Safety) Regulations 2008. Doors on escape routes bring in fire safety law too (Fire Safety Order 2005).
The standards: BS EN 16005 and BS 7036
BS EN 16005 is the product safety standard for power-operated pedestrian doorsets. It sets the safety requirements and the tests: sensor coverage, forces, speeds, guarding and behaviour when the power fails. Engineers test against it on every service visit. CIBSE notes that engineers should be qualified to it for doors fitted after March 2013 (CIBSE).
BS 7036 is the UK code of practice for safety in use. Its 2026 revision covers powered pedestrian doors, speed lanes and turnstiles, and manual revolving doors. It helps owners and engineers judge whether a particular installation suits the people who will use it, separating low-risk from high-risk sites and asking who could reasonably meet the door, including children, older people and people with impairments (BSI).
How often doors should be serviced
The law sets no fixed number. CIBSE describes daily checks of equipment and safety devices, a weekly safety check by the occupier, a yearly safety inspection for automatic sliding doors, and maintenance in line with the maker's recommendations. In practice:
- Once a yearThe floor for any powered door, with the safety inspection.
- Twice a yearMost offices, schools and public buildings.
- Four times a yearBusy shops, healthcare, care homes and transport.
- The maker's intervalAlways follow it if it is shorter.
What to keep in the logbook
CIBSE says manuals and logbooks must be provided and a record-keeping system kept (CIBSE). A good logbook has four parts:
- Door registerEach door's location, type, make and model, install date, and whether it is on an escape route.
- Weekly checksDate and initials for the occupier's walk-through: smooth movement, stop and reverse, guards, signs, clear path.
- Service visitsDate, firm and engineer, safety checks done, faults found, parts fitted, safe to use or not, next visit due.
- Faults and call-outsWhat went wrong, who reported it, when the engineer came and what was fixed.
Checking the engineer
The trade body for the industry is the Automatic Door Suppliers Association, which runs training and a member search. Ask any firm whether its engineers are trained to BS EN 16005 and whether it will leave a written report and logbook entry after each visit. We name the association only to help you check; this site is not linked to it.
Ready to book? See planned maintenance for what a visit covers and servicing prices for typical costs.
What owners ask about door rules
Is servicing automatic doors a legal requirement?
Yes, in effect. Workplace equipment, including powered doors, has to be kept in good repair and working efficiently, with a maintenance system where one is needed (Workplace Regulations, reg. 5). The law does not name an interval; the maker's instructions and the standards do.
What is BS EN 16005?
The European product safety standard for power-operated pedestrian doorsets, adopted in the UK. It sets the safety requirements and test methods doors are measured against, and engineers test to it on service visits.
What is BS 7036:2026?
The UK code of practice on safety in use of powered pedestrian doors and entrance control, revised in 2026. It guides the risk assessment for a particular site and its users (BSI). We have a post on what changed.
Does the duty apply to shops and offices open to the public?
Yes. The workplace rules protect staff, and the general duty under health and safety law covers visitors and members of the public as well (CIBSE).
Where these rules come from
- Workplace (Health, Safety and Welfare) Regulations 1992, regulation 5
- Workplace (Health, Safety and Welfare) Regulations 1992, regulation 18
- PUWER 1998, reg. 5 (work equipment), legislation.gov.uk
- Supply of Machinery (Safety) Regulations 2008
- Regulatory Reform (Fire Safety) Order 2005
- CIBSE Top Tips 5: automatic doors and gates
- BSI: why BS 7036:2026 matters for safer, more inclusive entrance systems
- Automatic Door Suppliers Association: find a member
Get a quote for compliant servicing
A postcode for the building is enough to start. Door details can follow.
No charge to you. We line up one door engineer that covers your area and tell you who it is first; your details only go to it after you agree.
Sent. Watch your inbox.
- Look out for an email naming the door engineer matched to your postcode.
- Answer yes to have your contact details shared with it, or no to stop there.
- Ask the engineer for a door survey and a written price before booking.